Warning

Warning

Invalid configuration found. Contact the administrator.

 

Magnetically inductive flow rate transmitter with frequency, current and relay outputs

Standardized stainless steel and plastic fittings are available for mounting the transmitter in the tubing. Pressures to PN 16 and temperatures up to 150 °C are possible, depending on the type.

The transmitter is fitted with a current output of 4 - 20 mA, a 0 - 240 Hz frequency output and a relay output with a 3 A, 250 V AC changeover contact. The power supply is 18 - 32 V DC. The instrument is reverse-polarity protected.
Whereas electrical connection is implemented by screw terminals, there are screw-type cable glands available for cable penetration.
The flow rate transmitter can be adjusted to different measurement ranges via DIP switches.
1663 (1/2)
To display and further process the measurement value, the flow rate transmitter can be connected to various instruments from the JUMO product range, as well as directly to a PLC.

Do you still have questions?


Portrait Michael Brosig

Head of Press Office

Michael Brosig 0049 661 6003 238 Michael.Brosig@JUMO.net 0049 661 6003 238