Warning

Warning

Invalid configuration found. Contact the administrator.

 
New product series for diverse applications

Point and Continuous Level Measurement with JUMO NESOS

With the JUMO NESOS product series, JUMO is introducing devices for point level measurement using a float and reed contact to the market for the first time. JUMO is also doing so for level measurement using a float and reed chain.

JUMO has already been producing the high-quality floats as a core element for these devices for around 40 years. Therefore, the combination of JUMO's high level of measurement technology expertise with market changes made the step towards a complete product a logical consequence. The devices are "made in Germany" – developed and produced in Fulda.

In JUMO NESOS devices, a float with an integrated magnet uses its magnetic field to switch one or more reed contacts at rising or falling levels.

The tried-and-tested measurement method excels due to its robust technology, cost-saving installation, and assembly. It is also maintenance-free and has a very good price-performance ratio. The measurement can take place in liquid media irrespective of foam formation, conductivity/permittivity, or pressure ratios.

JUMO NESO devices for point level measurement can be used in a wide temperature range from -52 to +240 °C. The devices stand out with a high switching point accuracy of ±2 mm. Additionally the optional installation of a temperature switch, as well as a Pt100 or a Pt1000 temperature sensor, is possible. The switching operation is contact-free, wear-free, and requires no auxiliary energy. During maintenance, the selected setup of the products means that a check can be carried out quickly.

Additionally JUMO NESOS devices for level measurement offer a virtually continuous standard signal from 4 to 20 mA and a temperature range of -52 to +200 °C. The resolution is up to 5 mm. Optional versions with Pt100 or Pt1000 temperature sensors are available.
Approvals for shipbuilding and/or explosion-protected areas as well as a certificate for the Pressure Equipment Directive (PED) are available. As a result, the products can be used in many industrial and process engineering applications.

Do you still have questions?


Head of Press Office

Michael Brosig 0049 661 6003 238 Michael.Brosig@JUMO.net 0049 661 6003 238