Buy Pressure Sensors

Pressure sensors from JUMO reliably acquire the relative, absolute, and differential pressure of industrial processes. They are available with analog outputs and digital interfaces, including IO-Link and SPE. Extensive approvals, SIL classification, and suitability for use in Ex areas ensure maximum efficiency and process reliability. Buy a pressure sensor now or request a sales quotation!

Filter

Displays

Sort by

New product

JUMO MIDAS C12 CA

Pressure transmitter − Compressed Air Basic type: 401014

The JUMO MIDAS C12 CA is designed as a pressure transmitter especially for requirements in the field of compressor pressure measurement. The ceramic sensor detects relative pressures which provides a reliable and long-term stable signal.

long-term stability
precision
optimized cost

Topseller

JUMO MIDAS S05

OEM pressure transmitter for universal applications Basic type: 401010

This pressure transmitter acquires the relative and absolute pressure. The measuring system is fully welded and can be used for all media. The silicon sensor is resistant to overloading even in the lowest measuring ranges. It is mainly used in mechanical and plant engineering and is also suitable for hydrogen applications in electrolyzers, synthesis plants, and mobile fuel cells.

Measuring range: 0 to 100 bar relative, 0 to 40 bar absolute
Compact design type
Piezoresistive silicon sensor

Topseller

JUMO MIDAS S06

OEM pressure transmitter for low pressure applications Basic type: 401011

This pressure transmitter is completely welded and designed for use in harsh conditions. It can also be used for level measurement. The applied silicon sensor is extremely resilient.

Measuring range: 0 to 400 mbar relative
Compact design type
DIN EN 61373 category 1B + DIN EN 50155

JUMO dTRANS p30

Pressure transmitter Basic type: 404366

The product records the pressure of liquid and gaseous media according to the piezoresistive or thin-film strain gauge measuring principle. The value is then converted into an electrical signal. The transmitter is suitable for universal use.

600 bar relative to 25 bar absolute
Temperature: -30 to +120 °C
Protection type: IP65/IP67

Pressure and differential pressure transmitter

For non-aggressive gases Basic type: 404304

The type 4304 product acquires the negative pressure, overpressure, or differential pressure of non-aggressive gases. Upon request, the device can be equipped with an LCD display. The transmitter is mainly used in heating engineering, air-conditioning, and ventilation technology.

0.50 to 1200 mbar DP, relative
Temperature -10 to +50 °C
Characteristic line: linear/root extracted

JUMO dTRANS p20 DELTA Ex d

Differential pressure transmitter with flameproof enclosure Basic type: 403023

The product measures the differential pressure of gases, steam, and liquids. The version [Ex d] (flameproof enclosure) can be mounted up to zone 0. The transmitter can be programmed and customized as required. The transmitter with flameproof enclosure is used in such places as power plants.

1 mbar to 100 bar DP
Explosion protection [Ex d]
Linearity: 0.07 %

JUMO dTRANS p35

Pressure sensor with IO-Link Basic type: 402058

The pressure sensor measures relative and absolute pressure in liquids and gases. The device is equipped with an IO-Link interface according to specification 1.1. As a result, the pressure sensor is suitable for use in plant and mechanical engineering for connecting to automation systems.

Measuring range from 400 mbar to 600 bar relative
Medium temperatures -40 to +125 °C
IO-Link interface

Topseller

JUMO TAROS S47 P

Precision pressure transmitter Basic type: 402072

The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers high process reliability through maximum accuracy as well as over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. or 0.6 and 40 bar abs. The precision transmitter is used, among other things, in mechanical and plant engineering.

0.1 to 100 bar rel; 0.6 to 40 bar abs
Temperature: -40 to + 125 °C
Protection type IP65 to IP69

Topseller

JUMO TAROS S46 H

Hygienic pressure transmitter Basic type: 402071

The device is designed according to the hygienic requirements for precision measurement and a long lifecycle. It offers process reliability through a high degree of accuracy, even over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. pressure or between 0.25 and 40 bar abs. pressure. The transmitter is used is the food and pharmaceutical industry.

0.1 to 100 bar rel; 0.25 to 40 bar abs
Temperature: -40 to + 125 °C
FDA compliant materials

New product

JUMO multirange and differential pressure transmitter

For non-aggressive gases Basic type: 402006

The product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms.

Measuring range: 2.5 hPa to 100 hPa DP
Zero point adjustment possible
0(2) to 10 V or 0(4) to 20 mA

New product

JUMO MIDAS S22 Ex

Miniature pressure transmitter for Ex areas Basic type: 404720

The miniature pressure transmitter measures the relative and absolute pressure of gases, steam, and liquids based on the piezoresistive measuring principle. It is completely welded and is particularly suitable for use in explosion-proof areas. Including oil, fuel, or gas plants.

2.5 to 100 bar relative and absolute
Medium temperature: -20 to +85 °C
Accuracy: as of 0.3 % MSP

New product

JUMO SIRAS P21 DP

Process pressure transmitter with SIL/PL Basic type: 403024

The pressure transmitter reliably and accurately measures differential pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.

Up to 100 bar
Linearity: 0.05 %
Safety Integrity Level (SIL 2/SIL 3), PL c/PL d

New product

JUMO SIRAS P21 AR

Process pressure transmitter with SIL/PL Basic type: 403028

The pressure transmitter reliably and accurately measures relative and absolute pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.

Up to 100 bar
Linearity: 0.05 %
Safety Integrity Level (SIL 2/SIL 3), PL c/PL d

New product

JUMO DELOS S02

Innovative precision pressure transmitter with display Basic type: 405056

The device is used to acquire relative and absolute pressures in liquid and gaseous media. The measuring ranges are between 0.1 to 100 bar relative or 0.4 to 60 bar absolute. In addition to high process reliability and a rotatable housing, the JUMO DELOS S02 stands out with its real-time data transmission via Single Pair Ethernet or IO-Link interface. The intelligent pressure sensor is configured via Bluetooth with the JUMO smartCONNECT app.

Measuring range: up to 100 bar relative/60 bar absolute
Accuracy as of 0.1 % from end value
Digital interfaces available

JUMO CANtrans p ceramic

Pressure transmitter with CANopen output Basic type: 402055

The product acquires either the relative or absolute pressure of liquid and gaseous media. It digitizes the pressure value and makes it available for further use through the "CANopen" serial bus protocol. The pressure transmitter is used in such environments as wind power plants.

Protection type: IP67
1.6 bar to 100 bar relative pressure
-20 to +85 °C

Pressure transmitter

With analog actual value display Basic type: 404312

The product acquires measuring ranges from -1 to +400 bar. It is mainly used in the chemical and process engineering industry as a combination between an on-site analog display with an analog standard output signal for remote transmission.

Measuring range: -1 to +400 bar
Protection type IP54
Deviation from characteristic line ≤ 0.5 %

JUMO CANtrans p

Pressure transmitter with CANopen output Basic type: 402056

Protection type IP67
-40 to +125 °C
600 bar relative to 25 bar absolute

JUMO differential pressure monitor

For air, smoke, and exhaust gases Basic type: 404201

The type 4 ADS product acquires the negative pressure, overpressure, or differential pressure of air, smoke, and exhaust gases in ventilation, air-conditioning, and filter systems. It is suitable to switch a current circuit ON, OFF or change it over, when the actual value changes in relation to the setpoint value.

Temperature -15 to +70 °C
Parts made out of polycarbonate
Measuring ranges: from 0.4 mbar

JUMO MIDAS DP10

Differential pressure transmitter Basic type: 401050

The product acquires the differential pressure in liquid as well as gaseous media and transforms it into an analog output signal. The transmitter is mainly used for filter monitoring.

400 mbar to 16 bar
DIN EN 61373 category 1B + DIN EN 50155
Compact design type

JUMO dTRANS p32

Pressure transmitter Basic type: 402051

The product acquires the relative pressure in dry, non-corrosive, and non-ionizing media and transforms it into an electrical signal. The basis is the piezoresistive measuring principle. The pressure transmitter is mainly used in lab technology and cleanroom technology.

0 to 1.6 bar relative pressure
Protection type: IP65/IP67
Sensitive pressure recording

JUMO DELOS HP

Precision pressure transmitter with switching contacts and display Basic type: 405054

The product is equipped with an electronic pressure switch with analog output and is specially designed for use on test benches, in laboratory areas, and for special machine construction. The default nominal values are between 160 and 600 bar.

Measuring range: 0 to 600 bar relative
Accuracy as of 0.15 % from end value
Measuring range scaling 1:4

JUMO dTRANS p20 Ex d

Process pressure transmitter with a flameproof enclosure Basic type: 403026

The product measures the relative and absolute pressure of gases, steam, and liquids and can be mounted up to zone 0. Front-flush process connections are available to meet hygiene requirements. The transmitter is used in such places as power plants.

-1 to +600 bar relative, 0 to 100 bar absolute
Linearity: 0.05 %
Deviation of 0.05 %

JUMO MIDAS DR

Pressure transmitter for control cabinet mounting Basic type: 401009

This pressure transmitter is the plant control cabinet variant of the basic JUMO MIDAS product. It acquires the relative pressure of liquid as well as gaseous media and transforms it into an electrical signal.

Measuring range: 0 to 16 bar relative
Elastomer seal
Compact design type

JUMO MIDAS C18 SW

OEM pressure transmitter for seawater applications Basic type: 401012

This pressure transmitter features a hysteresis-free ceramic measuring cell and a titanium case. This protects it against organic acids and solutions containing chloride. It is used in particular in ship building and laboratory engineering.

Measuring range: -1 to +100 bar relative
Vibration resistance
Elastomer seal

JUMO dTRANS p31

Pressure transmitter for increased medium temperatures Basic type: 402050

The product acquires either the relative or absolute pressure of liquid and gaseous media and transforms it into an electrical signal. The transmitter is made entirely of stainless steel and has a hygienic design. It is mainly used in the food and pharmaceutical industry.

Protection type: IP65/IP67
60 bar relative to 25 bar absolute
Linearity: ≤ 0.2 % MSP

JUMO dTRANS p33

Pressure transmitter and level probe for Ex areas Basic type: 404753

The product measures the pressure of non-aggressive and aggressive gases, steam, liquids, and dusts on the basis of the piezoresistive measuring principle. It was designed and certified according to ATEX directives. The transmitter is used, among other places, in flour and grain silos.

Admissible medium temperature: -40 to +200 °C
Up to 600 bar relative and 25 bar absolute
0.5 % MSP (linearity)

JUMO Wtrans p

Pressure transmitter with wireless data transmission Basic type: 402060

The product acquires the pressure of liquid or gaseous media in combination with a Wtrans receiver. The measured values on the receiver are provided in a digital format and as an electrical signal. The product is used in instances where laying a cable would be too demanding.

600 bar relative to 25 bar absolute
Range up to 300 m
Radio frequency: 868.4 MHz

Pressure transmitter

For small measuring ranges Basic type: 404327

The product acquires the pressure of liquid and gaseous media with the help of a capacitive ceramic sensor. The value is then converted into an electrical signal. The transmitter is used in such fields as medical technology.

50 mbar to 1 bar relative pressure
Linearity: ≤ 0.2 % of end value
Protection type: IP67

JUMO MIDAS C08

OEM pressure transmitter for basic applications Basic type: 401002

This pressure transmitter is a basic product and acquires the relative pressure of liquid as well as gaseous media. The ceramic sensor has a long-term stability of under 0.2 %. It is used in particular in mechanical and plant engineering.

-1 to +60 bar relative pressure
Compensates -20 to +100 °C
Elastomer seal

JUMO dTRANS p20 DELTA

Differential pressure transmitter Basic type: 403022

The product measures the differential pressure of gases, steam, and liquids. The version [Ex ia] can be mounted up to zone 0. The transmitter can be programmed and customized as required. One application is in the chemical and petrochemical industry.

Linearity: 0.07 %
Turn down: 1:200
HART® interface

JUMO MIDAS SI

OEM pressure transmitter Basic type: 401006

This pressure transmitter acquires the relative and absolute pressure of gaseous and liquid media and transforms it into an electrical signal. One of the application areas in which it is used is aggressive media.

1.6 bar relative to 25 bar absolute
Welded measuring system
Silicon sensor

JUMO MIDAS S19 R

OEM pressure transmitter for railway applications Basic type: 401008

This pressure transmitter has a completely welded measuring system without a seal and has been specifically designed for use in rail vehicles. The applied silicon sensor is extremely resilient even at low measuring ranges.

1.6 to 100 bar relative; 1.6 to 40 bar absolute
High EMC requirements
Specifically for railway technology

JUMO MIDAS S07 MA

OEM pressure transmitter – maritime approved Basic type: 401021

Depending on customer requirements, the product is available as a relative or absolute pressure transmitter. It meets the requirements of Environmental Category C, EMC 2 according to DNV GL directives. The pressure transmitter is mainly used in shipbuilding.

100 bar relative to 25 bar absolute
Reverse-polarity protection
0.2 % MSP (linearity)

JUMO CEROS S01 M

Digital pressure measuring cell Basic type: 405101

The pressure measuring cell provides a temperature compensated and calibrated digital/analog output signal. The piezoresistive sensing element with integrated signal processing is hermetically encapsulated. It ensures stable, precise linearity and accuracy values even under adverse conditions.

Measuring range from 100 mbar to 100 bar
for installation in one's own devices
Individual connection possibilities

JUMO MIDAS H20 HP

OEM pressure transmitter for high pressure applications Basic type: 401020

This pressure transmitter is used for measuring the pressure of liquid and gaseous media. The product works on the basis of the thin-film measuring principle and transforms the pressure into a voltage or current-based electrical standard signal. It is mainly used for high-pressure applications in commercial vehicles.

Measuring range: 100 to 1000 bar relative
Protection type IP65 to IP69K
ECE type approval

JUMO MIDAS S21 Ex

Pressure transmitter for use in Ex areas Basic type: 404710

The product measures the relative and absolute pressure of gases, steam, and liquids on the basis of the piezoresistive measuring principle. It is completely welded and is particularly suitable for use in explosion-proof areas. Including oil, fuel, or gas plants.

From 0.25 to 100 bar relative and absolute
Admissible medium temperature: -40 to +85 °C
Accuracy: as of 0.3 % MSP

JUMO dTRANS p20

Process pressure transmitter Basic type: 403025

The product measures the relative and absolute pressure of gases, steam, and liquids. Front-flush process connections are available to meet hygiene requirements. The transmitter is used several industries, including food and pharmaceutical. It is also suitable for hydrogen applications in electrolyzers, synthesis plants. and mobile fuel cells.

Linearity 0.05 %
High temperature up to 200 °C
-1 to +600 bar relative, 0 to 100 bar absolute

JUMO MIDAS

Pressure transmitter Basic type: 401001

This pressure transmitter acquires the relative pressure of liquid as well as gaseous media and transforms it into an electrical signal. It uses the thick film strain gauge measuring principle based on an aluminum oxide ceramic material (Al2O3). It is used in particular in mechanical and plant engineering.

High chemical resistance
-1 to +100 bar relative pressure
Compact design type

Discontinued model

JUMO DELOS SI

Precision pressure transmitter with switching contact and display Basic type: 405052

The product is designed according to hygienic requirements and offers a high degree of process reliability. The nominal values set by default are between 400 mbar and 60 bar. The transmitter is used in such places as dairies and breweries.

Measuring range: 0 to 60 bar relative/absolute
Accuracy as of 0.1 % from end value
Measuring range scaling 1:4

JUMO Wtrans receiver

Universal receiver for JUMO wireless measuring probes Basic type: 902931

The Wtrans receiver T01, in combination with suitable Wtrans transmitters, is used for the mobile or stationary measurement of the following physical measurands: temperature, pressure, and humidity. The wireless sensor technology also works in a harsh industrial environment.

Signals (0(4) to 20 mA, 0 to 10 V)
RS485 interface
Open air range 300 m

Diaphragm seal with flange connection

DIN EN 1092-1 with sealing strip type B1 Basic type: 409784

Diaphragm seals protect the pressure measuring device from contaminated, hot, highly viscous, stagnant, crystallizing, and especially corrosive media. This product has been designed according to DIN EN 1092-1 and is available with a sealing strip type B1.

Accessories: stainless steel flushing ring (1.4571)
Nominal pressure: PN 16 to PN 400
Process connection: DN 25, DN 50, DN 80, DN 100

Technical features at a glance

For process and industrial technology as well as for OEM applications
Relative, differential, and absolute pressure measurement
For pressures from 0.1 mbar to over 600 bar
With analog output as well as with IO-Link, CANopen, HART, and SPE interface

With extensive approvals, SIL classification, and for use in Ex areas
Calibrated pressure measuring cells with I2C interface for application in the customer system
Production of customized versions