Find the perfect product for your application

Welcome to the product selection tool from JUMO. Using practical filter functions you can easily find the measurement, control, and automation technology that meets your requirements in our wide product range. You can sort by measurand, measuring range, measuring principle, connections, interfaces, approvals, and much more. You can also configure many products yourself before you make an order or a request.

  • Product selection guide

Product selector

Filter
1
Hits: 364
Topseller
JUMO CTI-500 - Inductive conductivity transmitter with switching contacts

JUMO CTI-500
Inductive conductivity transmitter with switching contacts Basic type: 202755
The device is used for measuring and controlling the conductivity or the concentration of liquid media. The integrated temperature measurement enables precise and quick compensation. Additional functions allow the combined toggling of measuring range and temperature coefficient.
  • For inductive conductivity sensors
  • Separate or compact design type
  • With salt dilution control
Topseller
JUMO tecLine CR-GT - Conductive two-electrode conductivity sensor

JUMO tecLine CR-GT
Conductive two-electrode conductivity sensor Basic type: 202925
These sensors are used in conjunction with conductivity transmitters to define the electrolytic conductivity in liquids. They are especially suitable for media separation, drinking water preparation, and for inspecting as well treating wastewater and service water.
  • Measuring range: 10 µS/cm to 15 mS/cm
  • Process pressure up to 16 bar
  • Cell constant K = 1.0
Topseller
Combination fitting - For membrane-covered sensors

Combination fitting
For membrane-covered sensors Basic type: 202811
The product is designed for mounting several electrochemical sensors. It is typically used for monitoring the disinfection of drinking and swimming pool water as well as slightly polluted process and cooling water.
  • For electrochemical sensors
  • Incl. flow monitor
  • Temperature 0 to 60 °C and 0 to 90 °C
Topseller
JUMO safetyM STB/STW - Safety temperature limiter, safety temperature monitor according to DIN EN 14597

JUMO safetyM STB/STW
Safety temperature limiter, safety temperature monitor according to DIN EN 14597 Basic type: 701150
The device is primarily built to monitor thermotechnical processes accurately and switch the systems to a safe operating status in the event of malfunctions. As a result, risks to people, the environment, production facilities, and production goods can be identified and averted at an early stage.
  • AC 110 to 240 V; +10/-15 %; ACDC 20 to 30 V
  • 2 relay outputs
  • 1oo2D architecture
Topseller
JUMO ecoLine/JUMO BlackLine pH - pH combination electrode with glass or plastic shaft

JUMO ecoLine/JUMO BlackLine pH
pH combination electrode with glass or plastic shaft Basic type: 201005
The electrode acquires the pH value of water and aqueous-based media. It is used, among other places, in swimming pools, aquaristics for monitoring and treating drinking water, and in greenhouse technology.
  • Measuring range: pH 0 to 12
  • Temperature: 0 to 60 °C
  • Insertion length: 120 mm
Topseller
JUMO tecLine HD - pH combination electrodes

JUMO tecLine HD
pH combination electrodes Basic type: 201021
The product acquires the pH value of water and aqueous-based media. It has robust industrial electrodes for the most demanding applications with increased dirt and poison load as well as oil-containing media.
  • Measuring range: pH 0 to 14
  • Temperature: 0 to 135 °C
  • Process pressures up to 13 bar
Topseller
Hygro transducer, hygrothermal transducer, and CO2 measuring probe - For facility management and climate monitoring

Hygro transducer, hygrothermal transducer, and CO2 measuring probe
For facility management and climate monitoring Basic type: 907021
This measuring probe is mainly used in heating engineering, air-conditioning, and ventilation technology. It sets itself apart in particular through high measuring accuracy, long-term stability, and chemical resistance.
  • Measuring range: 0 to 100 % RH
  • Medium: air, pressureless
  • CO2 measuring range: 0 to 10000 ppm
Topseller
JUMO Cloud - IoT platform for secure process management

JUMO Cloud
IoT platform for secure process management Basic type: 701810
The IoT platform for process visualization, data acquisition, evaluation, and archiving enables worldwide access to measurement data via common web browsers. The JUMO Cloud is characterized by high security as well as valuable visualization, alarm, and planning functions.
  • End-to-end encryption
  • Process visualization
  • Unlimited access
Topseller
JUMO variTRON 500 - Central processing unit for an automation system

JUMO variTRON 500
Central processing unit for an automation system Basic type: 705002
JUMO variTRON 500 is based on the modular platform JUMO JUPITER. The central processing unit along with the tried-and-tested input and output modules (incl. controller module) of the measuring, control, and automation system JUMO mTRON T form an overall system and provide a PLC (CODESYS V3.5).
  • State-of-the-art interfaces such as OPC UA, MQTT
  • PROFINET IO, EtherCAT, Modbus-TCP/RTU
  • 800 MHz quad-core processor
Topseller
JUMO smartWARE SCADA - Software for process monitoring and control

JUMO smartWARE SCADA
Software for process monitoring and control Basic type: 701820
The SCADA software provides convenient access to measurement data via common web browsers and offers functions for process visualization as well as evaluation and archiving of the acquired data. JUMO smartWARE SCADA also supports manufacturing and work processes with valuable monitoring, alarm, and planning functions.
  • Across networks
  • Process visualization
  • Unlimited access
Topseller
JUMO DICON touch - Two-Channel/Four-Channel Process and Program Controller

JUMO DICON touch
Two-Channel/Four-Channel Process and Program Controller Basic type: 703571
DICON touch can be used to perform complex control and management tasks. The plant can be visualized and operated via freely-definable process screens. The device has a modular design and can therefore be adapted to the individual plant.
  • Cascade control
  • Modbus master TCP/RTU
  • Up to 4 analog inputs
Topseller
JUMO dTRANS T06 - Multifunctional four-wire transmitter in mounting rail case

JUMO dTRANS T06
Multifunctional four-wire transmitter in mounting rail case Basic type: 707071
The transmitter acquires the temperature through an RTD temperature probe or a thermocouple (double thermocouple). The transmitter can also acquire standard signals. Connection takes place through an RTD temperature probe with two-wire, three-wire, or four-wire connection.
  • 1 universal measurement input
  • RS485 interface Modbus-RTU
  • SIL 2/SIL 3 according to DIN EN 61508
Topseller
JUMO dTRANS T05 - Programmable transmitter in two-wire technology

JUMO dTRANS T05
Programmable transmitter in two-wire technology Basic type: 707050
The transmitters acquire sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers in two-wire, three-wire, or four-wire circuits.
  • Output signal 4 to 20 mA/0 to 10 V
  • Temp in °C or °F
  • Voltage signals -100-+1100 mV
Topseller
JUMO mTRON T - Central processing unit

JUMO mTRON T
Central processing unit Basic type: 705001
The central processing unit contains the process map of the application and manages the configuration and parameter data of the overall system. 9 program generators and extensive limit value monitoring functions are available for individual control tasks.
  • 9 program generators
  • OPC server (CODESYS V3.5)
  • PLC according to IEC 61131-3
Topseller
JUMO MIDAS S06 - OEM pressure transmitter for low pressure applications
H2 Signet

JUMO MIDAS S06
OEM pressure transmitter for low pressure applications Basic type: 401011
This pressure transmitter is completely welded and designed for use in harsh conditions. It can also be used for level measurement. The applied silicon sensor is extremely resilient.
  • Measuring range: 0 to 400 mbar relative
  • Compact design type
  • DIN EN 61373 category 1B + DIN EN 50155
Topseller
Screw-in thermocouples - With terminal head form B
H2 Signet

Screw-in thermocouples
With terminal head form B Basic type: 901020
Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Their installation type enables the formation of reliable seals, both for vacuum and overpressure applications.
  • Temp.: -200 to +800 °C
  • Insertion length 160 to 600 mm
  • Thermocouples type J, K, and L
Topseller
JUMO TAROS S47 P - Precision pressure transmitter
H2 Signet

JUMO TAROS S47 P
Precision pressure transmitter Basic type: 402072
The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers high process reliability through maximum accuracy as well as over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. or 0.6 and 40 bar abs. The precision transmitter is used, among other things, in mechanical and plant engineering.
  • 0.1 to 100 bar rel; 0.6 to 40 bar abs
  • Temperature: -40 to + 125 °C
  • Protection type IP65 to IP69
Topseller
JUMO TAROS S46 H - Hygienic pressure transmitter
H2 Signet

JUMO TAROS S46 H
Hygienic pressure transmitter Basic type: 402071
The device is designed according to the hygienic requirements for precision measurement and a long lifecycle. It offers process reliability through a high degree of accuracy, even over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. pressure or between 0.25 and 40 bar abs. pressure. The transmitter is used is the food and pharmaceutical industry.
  • 0.1 to 100 bar rel; 0.25 to 40 bar abs
  • Temperature: -40 to + 125 °C
  • FDA compliant materials
Topseller
Screw-in RTD temperature probe - With terminal head form B
H2 Signet

Screw-in RTD temperature probe
With terminal head form B Basic type: 902020
Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.
  • Temp.: -50 to +600 °C
  • Terminal heads BUZ/BUZH/BBK
  • Temperature sensor Pt100/Pt500/Pt1000
Topseller
JUMO MIDAS S05 - OEM pressure transmitter for universal applications
H2 Signet

JUMO MIDAS S05
OEM pressure transmitter for universal applications Basic type: 401010
This pressure transmitter acquires the relative and absolute pressure. The measuring system is fully welded and can be used for all media. The silicon sensor is resistant to overloading even in the lowest measuring ranges. It is mainly used in mechanical and plant engineering and is also suitable for hydrogen applications in electrolyzers, synthesis plants, and mobile fuel cells.
  • Measuring range: 0 to 100 bar relative, 0 to 40 bar absolute
  • Compact design type
  • Piezoresistive silicon sensor
Topseller
JUMO digiLine pH/ORP/T - Digital or analog interface for pH/ORP/T

JUMO digiLine pH/ORP/T
Digital or analog interface for pH/ORP/T Basic type: 202705
This transmitter permits transmission of the measured value from the sensor to the measuring or automation device via digital bus communication or as an analog signal. The digital device version of the transmitter has a 5-pole M12 plug connection – the analog version an 8-pole one.
  • For pH, redox, and temperature
  • M12 plug connection
  • Analog or digital output
Topseller
JUMO AQUIS touch P - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch P
Modular multichannel measuring device (liquid analysis) Basic type: 202580
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Panel built-in device
  • 2 analysis sensors and 15 measuring signals
  • P, PI, PD, and PID behavior
Topseller
JUMO tecLine HD - Redox combination electrodes

JUMO tecLine HD
Redox combination electrodes Basic type: 201026
The electrode acquires the redox potential of water and aqueous-based media. A robust industrial electrode for the most demanding applications with increased dirt and poison load as well as oil-containing media.
  • Measuring range: ± 1500 mV
  • Temperature: 0 to 135 °C
  • Process pressure up to 13 bar
Topseller
JUMO AQUIS touch S - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch S
Modular multichannel measuring device (liquid analysis) Basic type: 202581
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Wall-surface-mounted housing
  • 4 analysis sensors and 21 measuring signals
  • P, PI, PD, and PID behavior
Topseller
JUMO CTI-750 - Inductive conductivity transmitter with switching contacts

JUMO CTI-750
Inductive conductivity transmitter with switching contacts Basic type: 202756
The device is used for measuring and controlling the conductivity or the concentration of liquid media. The integrated temperature measurement enables precise and quick temperature compensation. Additional functions allow for optimum use in CIP processes.
  • For inductive conductivity sensors
  • Separate or compact design type
  • For CIP cleaning
Topseller
JUMO diraVIEW 104/108/116/132 - Digital indicator

JUMO diraVIEW 104/108/116/132
Digital indicator Basic type: 701510
Devices that can be used universally in various DIN formats to display process variables. The basic version includes a min/max value function, a hold function, a taring function, limit value monitoring functions, digital control signals, timer functions, and a service counter.
  • 1 universal analog input
  • Galvanic isolation 3000 V
  • 5 DIN formats (size)
Topseller
JUMO tecLine CR - Conductive two-electrode conductivity sensor

JUMO tecLine CR
Conductive two-electrode conductivity sensor Basic type: 202924
These sensors are used in conjunction with conductivity transmitters to define the electrolytic conductivity in liquids. The materials in the sensors are physiologically harmless and meet FDA requirements.
  • Measuring range: 0.05 µS/cm to 1 mS/cm
  • Process pressure up to 16 bar
  • Cell constant K = 0.01 or 0.1
Topseller
Panel-mounted thermostat - EM series to 500 °C

Panel-mounted thermostat
EM series to 500 °C Basic type: 602021
The devices of the EM series are available as temperature controllers (TR), temperature monitors (TW), temperature limiters (TB), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Control range: up to 300 °C
Topseller
Surface-mounted single thermostats - ATH series

Surface-mounted single thermostats
ATH series Basic type: 603021
The devices of the ATH series are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB sets the system being monitored to a safe operating status.
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Max. control range: 20 to 500 °C
Topseller
JUMO diraTRON - Compact controller

JUMO diraTRON
Compact controller Basic type: 702110
Universally-applicable devices in 5 DIN formats for controlling process variables. The basic type includes autotuning, a ramp function, a program controller, manual mode, limit value monitoring functions, digital control signals, extensive timer functions, and a service counter.
  • 1 control channel
  • Display of individual texts
  • Service counter
Topseller
JUMO heatTHERM-AT and DR - Surface-mounted thermostat

JUMO heatTHERM-AT and DR
Surface-mounted thermostat Basic type: 603070
The JUMO heatTHERM-DR (design type 7+8) type is a specific variation with a special case bottom section for DIN rail or wall mounting. As a result, easy installation on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible.
  • "Push-In®" terminal technology
  • Surface-mounted thermostat or DIN-rail thermostat
  • Max. control range up to 350 °C
Topseller
JUMO eTRON T100 - Electronic thermostat with optional PID two-state controller function

JUMO eTRON T100
Electronic thermostat with optional PID two-state controller function Basic type: 701052
The electronic thermostat for DIN rail mounting has been especially developed for temperature control and monitoring. RTD temperature probes, thermocouples, current signals, and special temperature probes that are used in railroad technology can be connected to the measurement input. The intuitively operated device is optionally available as a PID two-state controller.
  • Relay (changeover contact 10 A), PhotoMOS® relay
  • Pt100, Pt1000, KTY2X-6
  • Thermocouple type J, L, and K
Topseller
JUMO flowTRANS US W01 - Ultrasonic flowmeter for liquids

JUMO flowTRANS US W01
Ultrasonic flowmeter for liquids Basic type: 406050
The flowmeter measures precisely in conductive and non-conductive media. Ultrasonic technology allows it to be absolutely free of wear and maintenance. Its metal-free housing and the plastic pipe in various nominal widths allow it to be used in a flexible manner – even when dealing with corrosive media.
  • Nominal widths DN 15 to DN 32
  • Nominal pressure up to PN 16
  • Medium temperature up to 80 °C
Topseller
Screw-in RTD temperature probe - With terminal head form J
H2 Signet

Screw-in RTD temperature probe
With terminal head form J Basic type: 902030
Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.
  • Temp.: -50 to +400 °C
  • Reliable seal in the event of vacuum and overpressure
  • Temperature sensor Pt100
New product
Intrinsically safe industrial measuring probe - For humidity, temperature, and derived variables

Intrinsically safe industrial measuring probe
For humidity, temperature, and derived variables Basic type: 907037
This measuring probe has been designed for accurate and risk-free humidity monitoring in potentially explosive areas. It is mainly used in challenging industrial applications and under harsh conditions.
  • Measuring range: 0 to 100 % RH
  • ATEX approval up to zone 0
  • Pressure resistant up to 100 bar
New product
JUMO multirange and differential pressure transmitter - For non-aggressive gases

JUMO multirange and differential pressure transmitter
For non-aggressive gases Basic type: 402006
The product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms.
  • Measuring range: 2.5 hPa to 100 hPa DP
  • Zero point adjustment possible
  • 0(2) to 10 V or 0(4) to 20 mA
New product
JUMO NESOS R04 LS - Float switch in curved version

JUMO NESOS R04 LS
Float switch in curved version Basic type: 408304
The float switch is typically used to switch alarms, pumps, signal lamps, valves, and horns via a contact protection relay. When connected to intrinsically safe electrical circuits, the intrinsically safe [Ex i] version of the product meets the requirements.
  • Guide tube length up to 2000 mm
  • Medium temperature: -52 to 240 °C
  • Optional temperature sensor/switch
New product
JUMO NESOS R40 LSH - Float switch in horizontal design

JUMO NESOS R40 LSH
Float switch in horizontal design Basic type: 408340
The horizontal float switch can be easily mounted, e.g. on the side of a tank wall. Due to its construction it is suitable for the minimum and maximum limit level of liquids (MIN/MAX level). It offers up to 2 switching contacts for redundant level measurement. Thanks to Ex approvals, it is ideal for the chemical industry, power plants, machine and container construction.
  • Guide tube length up to 1000 mm
  • Medium temperature: -52 to 240 °C
  • Optional temperature sensor/switch
New product
JUMO IPC 300 - Electronic transformer

JUMO IPC 300
Electronic transformer Basic type: 709051
The JUMO IPC 300 is an electronic transformer for controlling heating loads. Due to the amplitude control, the mains current is proportional to the required performance. This reduces interference (flicker, harmonics) and energy costs while increasing the durability of MoSi2 and SiC heating elements, which in turn reduces operating costs.
  • Power up to 40 kW
  • Amplitude control
  • Protection of MoSi2 and SiC heating elements
New product
JUMO ZELOS C01 LS - Capacitive level switch

JUMO ZELOS C01 LS
Capacitive level switch Basic type: 408401
The capacitive level switch identifies the level of liquids and solids. It can also be used in pressurized tanks or pipes. Typically, the level switch is used in industrial environments for applications with requirements for overflow and dry-run protection or for media detection (such as sludge in separation processes).
  • From liquids to bulk materials
  • Medium temperature: -40 to +200 °C
  • Automatic media detection
New product
JUMO Ex-i Isolating Switch Amplifier - Two-channel isolating switch amplifier for Ex applications

JUMO Ex-i Isolating Switch Amplifier
Two-channel isolating switch amplifier for Ex applications Basic type: 707540
The intrinsically safe isolation switching amplifier ensures reliable, galvanic isolation and safe transmission of switching signals in Ex applications. It can be mounted in Ex zone 2 and the sensor can be operated in zone 0. The JUMO Ex-i isolating switching amplifier is ideal for JUMO NESOS float switches with 2 switch contacts and also supports NAMUR proximity sensors.
  • 2 channels
  • Galvanic three-way isolation
  • Line fault detection
New product
JUMO miroVIEW - Smart digital indicator with limit value monitoring function for panel mounting

JUMO miroVIEW
Smart digital indicator with limit value monitoring function for panel mounting Basic type: 701590
The JUMO miroVIEW is a digital indicator with measurement input for RTD temperature probes for panel mounting. In the 60 mm and 80 mm round installation format, the JUMO miroVIEW offers an alternative solution for mechanical dial thermometers or contact dial thermometers.
  • Measuring inputs for RTD temperature probes
  • Round installation formats
  • Quick configuration via USB
New product
JUMO MIDAS S22 Ex - Miniature pressure transmitter for Ex areas

JUMO MIDAS S22 Ex
Miniature pressure transmitter for Ex areas Basic type: 404720
The miniature pressure transmitter measures the relative and absolute pressure of gases, steam, and liquids based on the piezoresistive measuring principle. It is completely welded and is particularly suitable for use in explosion-proof areas. Including oil, fuel, or gas plants.
  • 2.5 to 100 bar relative and absolute
  • Medium temperature: -20 to +85 °C
  • Accuracy: as of 0.3 % MSP
New product
JUMO SIRAS P21 DP - Process pressure transmitter with SIL/PL

JUMO SIRAS P21 DP
Process pressure transmitter with SIL/PL Basic type: 403024
The pressure transmitter reliably and accurately measures differential pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.
  • Up to 100 bar
  • Linearity: 0.05 %
  • Safety Integrity Level (SIL 2/SIL 3), PL c/PL d
New product
JUMO railTEMP - Wheelset temperature probe

JUMO railTEMP
Wheelset temperature probe Basic type: 902195
JUMO railTEMP has a qualified measuring insert especially developed for railway applications with up to 2 sensing elements and can be equipped with different sensors. The firmly attached connection line is available with a variety of different connections or high-quality connectors. Halogen-free materials and cable protection ensure maximum safety in rail transport as well as reliable measurement results.
  • Temp.: -50 to +200 °C
  • Protection type: IP68 / IP69
  • Certified acc. to DIN EN 50155/61373
New product
JUMO hydroTRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version

JUMO hydroTRANS S30
Humidity and temperature transmitter with optional CO2 module in duct version Basic type: 907043
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The duct design is suitable for use in ventilation ducts and lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.
  • Medium: Air, pressureless (non-aggres.)
  • Duct version (IP65)
  • Temperature range: -40 to +80 °C
New product
JUMO hydroTRANS S40 - Humidity and temperature transmitter with optional CO2 module in rod version

JUMO hydroTRANS S40
Humidity and temperature transmitter with optional CO2 module in rod version Basic type: 907044
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The rod version is suitable for use in hard-to-reach areas and ventilation lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.
  • Medium: air, pressureless (non-aggres.)
  • Rod version (IP65)
  • Temperature range: -40 to +80 °C
New product
JUMO hydroTRANS S10 - Humidity and temperature transmitter with optional CO2 module in indoor version

JUMO hydroTRANS S10
Humidity and temperature transmitter with optional CO2 module in indoor version Basic type: 907045
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The room version is suitable for indoor use (e.g. offices, residential premises, etc.). The humidity measuring device is available with various interfaces. It is characterized by ease of installation and reliable sensor technology.
  • Medium: air, pressureless (non-aggres.)
  • Indoor version (IP20)
  • Temperature range: -5 to 55 °C
New product
JUMO dTRANS T06 Junior - Multifunctional four-wire transmitter in mounting rail case

JUMO dTRANS T06 Junior
Multifunctional four-wire transmitter in mounting rail case Basic type: 707070
The JUMO dTRANS T06 Junior multifunction four-wire transmitter is the solution for a wide range of applications in plant engineering due to its galvanic isolation and customer-specific linearization. This entry-level model has a width of only 17.5 mm so that it takes up little space in a control cabinet.
  • 1 universal input
  • Small size 17.5 mm
  • High level of galvanic isolation
New product
JUMO hydroTRANS S20 - Humidity and temperature transmitter with optional CO2 module in wall-mounted version

JUMO hydroTRANS S20
Humidity and temperature transmitter with optional CO2 module in wall-mounted version Basic type: 907042
The humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The wall-mounted version is suitable for use in harsh environments such as storage rooms and production facilities. The humidity sensor is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology. Innovative Single Pair Ethernet technology enables a direct connection to the JUMO Cloud and other automation systems.
  • Medium: air, pressureless (non-aggres.)
  • Wall-mounted version (IP65)
  • Temperature range: -40 to 80 °C

item items, maximum number of items reached

We are at your service

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.
Contact us